For leaders

UK PSTI for connected device makers: the three rules

By Manish SharmaPublished 3 min read

Founder and CEO, MAGDOX. Writes on firmware security and device regulation.

Since 29 April 2024, consumer connectable products sold in the UK must meet three security requirements under the Product Security and Telecommunications Infrastructure (PSTI) regime: no universal default passwords, published information on how to report security issues, and a published minimum security update period. Each product must come with a statement of compliance. Firmware can show whether the password rule holds; the other two are documents you publish.

In short

  • Since 29 April 2024, consumer connectable products sold in the UK must meet three security requirements: unique or user-set passwords, a published way to report security issues and a published minimum update period.
  • Each product must come with a statement of compliance, and importers and distributors must not sell it without one.
  • Firmware can show whether the password rule holds. The other two requirements are documents you publish, so write them once and keep them current.

The UK's product security regime comes from the Product Security and Telecommunications Infrastructure Act 2022 and the 2023 security requirements regulations. The government's guidance page is the plain-language version, and the source for everything below.

What are the three UK PSTI requirements?

What are the three UK PSTI requirements?
RequirementWhat it asksWhere the evidence is
PasswordsPasswords must be unique per product, or defined by the userThe firmware and the setup flow
Reporting security issuesPublish how to report security issues, with expected timescales for acknowledgement and status updates, in English and without the reader having to askYour website
Minimum security update periodPublish how long the product will receive security updates, with an end date, in a clear and accessible formYour website, the packaging or the listing

The password rule has a detail that catches many devices. A password unique per product must not be based on incremental counters, public information or an easy derivation of an identifier such as the serial number, unless it is protected by accepted encryption or keyed hashing. A password on a label that is just the MAC address with a prefix would not meet it.

What is the statement of compliance?

Every product must be accompanied by a statement of compliance that contains the information in Schedule 4 of the regulations. The guidance notes it may be digital rather than printed. Importers and distributors must not make a product available without one, so expect them to ask for it.

Who must comply, and who checks?

Manufacturers, importers and distributors of relevant connectable products all have duties. A manufacturer based abroad can use an authorised representative in the UK for some of them, but stays liable. The Office for Product Safety and Standards enforces the regime.

Some product categories are excepted in Schedule 3 of the regulations. Check the list for your product before you assume either way.

What can the firmware show?

The password requirement is the one an analysis of the firmware image can test.

  • No universal default password. Look for credentials shared by every unit, in the web interface, telnet, SSH, the serial console and the chip vendor's SDK.
  • No hard-coded credentials or backdoor accounts. These defeat a unique password even when the setup flow is right.
  • No account without a password. A root account with an empty password on a debug shell counts.
  • Passwords stored with a strong hash. Not in clear text in a configuration file.

The two publishing requirements are not in the firmware. They are pages and documents, so the work is writing them once and keeping the update period current as products age. A password checklist covers the first requirement across the UK, the EU and the US.

How does PSTI compare with the EU and India?

The three requirements follow ETSI EN 303 645, the European consumer IoT baseline: its provisions on passwords (5.1), vulnerability reports (5.2) and the update period (5.3-13). India's TEC 31318:2025 follows the same standard. Work done for one market carries over. Our map of device security frameworks by market sets them side by side, and the EU CRA timeline covers the EU's broader rules.

FDIE by Magdox shows UK PSTI as a framework for products sold in the UK. Its device checks give evidence for the password rule, and your declared disclosure policy and support period answer the other two. It is evidence and gap finding; OPSS and your own legal review make the final call.

Questions

What are the three UK PSTI security requirements?

Passwords must be unique per product or set by the user; the manufacturer must publish how to report security issues, with expected timescales for acknowledgement and status updates; and it must publish the minimum period for which the product receives security updates.

When did the UK PSTI regime start?

On 29 April 2024, under the Product Security and Telecommunications Infrastructure Act 2022 and its 2023 security requirements regulations.

Who must comply with UK PSTI?

Manufacturers, importers and distributors of relevant connectable products made available in the UK. A manufacturer based abroad stays liable even if a UK authorised representative carries out some of its duties.

Who enforces UK PSTI?

The Office for Product Safety and Standards (OPSS), part of the Department for Business and Trade.

Sources

  1. GOV.UK, The UK Product Security and Telecommunications Infrastructure (Product Security) regime gov.uk
  2. Product Security and Telecommunications Infrastructure Act 2022, Part 1 (legislation.gov.uk) legislation.gov.uk
  3. The PSTI (Security Requirements for Relevant Connectable Products) Regulations 2023 (legislation.gov.uk) legislation.gov.uk
  4. Explanatory memorandum to the 2023 Regulations (PDF) legislation.gov.uk

Product and project names are trademarks of their owners, used only to identify the public firmware, software and standards discussed. MAGDOX is not affiliated with or endorsed by them.

  • For engineers

    EN 18031 for routers and cameras: which part applies

    EN 18031 is the harmonised standard for the EU's radio equipment security rules, which have applied since 1 August 2025 and give way to the Cyber Resilience Act on 11 December 2027. A Wi-Fi router or camera sold in the EU usually needs part 1 and, because it handles personal data, part 2; part 3 applies only when the device moves money. The Official Journal citation removes the presumption of conformity in three cases, and optional passwords is the one most router and camera makers trip on.

    · 4 min read

  • For leaders

    EU CRA timeline and checklist for device makers

    The EU Cyber Resilience Act applies to connected products sold in the EU, wherever they are made. It has been in force since 10 December 2024. Reporting of actively exploited vulnerabilities and severe incidents applies from 11 September 2026, and the rest, from the Annex I requirements to the CE marking, from 11 December 2027. This guide puts the dates, the Article 14 clocks and the technical file on one page, with a checklist to work through.

    · 6 min read

  • For engineers

    One firmware analysis for India, the EU and the US

    India, the EU and the US ask device makers the same technical questions in different words: no default passwords, signed updates, encrypted traffic, only the services the device needs, and no known exploitable vulnerabilities. One firmware analysis can answer those questions once and map each answer to the provision that asks it, from MeitY ER: 01 and NCCS ITSAR to the EU Cyber Resilience Act for products sold in the EU, EN 18031-1, NIST IR 8425 and the California and Oregon laws. Lab tests, procedures and policy documents still come from you.

    · 6 min read

See what is inside your next release

Book a 30 or 45 minute demo with the team that builds FDIE, or request access for your organisation.

Request access